Re: [MW:21979] A-number as per ASME section IX.

Hi!
As per ASME sec IX
the A No is expected Weld chemistry range and for filler metal F no is designated
Moreover for CS welding, while selection of Filler ,you have to give importance to Mechanical properties and not exact matching of chemistry
Regards
Hegde prakash
--------------------------------------------
On Tue, 23/9/14, Manoj John <manojacgnr@gmail.com> wrote:

Subject: [MW:21978] A-number as per ASME section IX.
To: materials-welding@googlegroups.com
Date: Tuesday, 23 September, 2014, 2:11 PM

Dear All,
I have one doubt.
In section IX A-number specified for mild steel
is 1 and when we see the chemistry of the filler metal in
section II part c the range specified is going beyond the
specified limit Si - 1% and Mn - 1.6% as per section IX.
 if a batch of carbon steel filler metal having Sil 1.03
and Mn. 1.6 % then in which A-number we can consider and
shall we qualified a new procedure for this particular batch
and which A-number we will assign.
Thanks in advance,Manoj.
 



--

To post to this group, send email to
materials-welding@googlegroups.com

To unsubscribe from this group, send email to
materials-welding+unsubscribe@googlegroups.com

For more options, visit this group's bolg at http://materials-welding.blogspot.com/

http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm

 

The views expressed/exchnaged in this group are members
personel views and meant for educational purposes only,
Users must take their own decisions w.r.t. applicable
code/standard/contract documents.

---

You received this message because you are subscribed to the
Google Groups "Materials & Welding" group.

To unsubscribe from this group and stop receiving emails
from it, send an email to materials-welding+unsubscribe@googlegroups.com.

For more options, visit https://groups.google.com/d/optout.


--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm

The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.