Re: [MW:21950] Lack of fusion in production welding - GMAW !!!

what is thickness

THANKS & BEST REGARDS

KG.PANDITHAN, AWS-CWI, CSWIP 3.1

CONSULTANT-WELDING & QUALITY

On Sat, Sep 20, 2014 at 4:10 PM, <george.dilintas@gr.bureauveritas.com> wrote:

Your LOF is intermittent of continuous?
Best regards
Dr Georgios Dilintas
Authorized Nuclear Inspector
Authorized Inspector Supervisor
HBS Regional Technical Manager

---

  From: Vadivel Mahadevan [vadivelmahadev@gmail.com]
  Sent: 09/20/2014 02:19 AM MST
  To: materials-welding@googlegroups.com
  Subject: [MW:21945] Lack of fusion in production welding - GMAW !!!

Dear Experts,

 

I face Lack of fusion problem in GMAW process in the production weld often.

WPS qualified on short circuiting mode as the torch is designed to the same.

But when I use the same current and voltage I come across Lack of fusion

The wire I use is ER316L of 1.2mm dia.Bare wire , volt not more than 19V.

 

Now I started using 23 to 26V(Spray transfer mode volt range) to overcome my issue.

Can you suggest what are the parameters I need to control to get a sound weld in the short circuiting mode.

 

Regards

Vadivel. M

07829007400

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
 
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
This message contains confidential information. To know more, please click on the following link: http://disclaimer.bureauveritas.com

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
 
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
 
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.