Re: [MW:21913] SS Filler wire selection

BEGIN:VCARD
X-LOTUS-CHARSET:UTF-8
VERSION:3.0
PRODID:-//Lotus Development Corporation//NONSGML Notes 8.5.2//EN_C
FN:George H Dilintas/GRC/VERITAS
N:Dilintas;George;;;
ADR;TYPE=WORK;TYPE=PREF:PIRAEUS;;23\, Etolikoy Str.;PIRAEUS;;185 45
;GREECE
ADR;TYPE=HOME;TYPE=PREF:;;19-21 B. Laskou str.;Athens;Attika;11 633
;Greece
TEL;TYPE=HOME:+30-1-7667 197
TEL;TYPE=WORK:+30-210-40 63 113
TEL;TYPE=HOME;TYPE=FAX:+30 - 1 - 7667 197
TEL;TYPE=WORK;TYPE=FAX:+30-210-40 63 118
TEL;TYPE=CELL:+30 -69 44-64 62 04
EMAIL;TYPE=WORK;TYPE=PREF;TYPE=INTERNET
:george.dilintas@gr.bureauveritas.com
ORG:Bureau Veritas;Industry
REV:20131201T024559Z
END:VCARD

I do not see any reason for 309. There is no risk for low FN and hot cracking.
You may use 309, it will harm your pocket only if you have a lot of welds.
You can go with 316L with no problem
If you should weld 316L to carbon steel, then 309 would be mandatory to avoid low FN and hot cracking

best regards

Dr. Georgios Dilintas

Authorized Nuclear Inspector
Authorized Inspector Supervisor


I&F REGIONAL TECHNICAL MANAGER
BUREAU VERITAS HELLAS

Tel: +30 210 40 63 113/4
Fax: +30 210 40 63 118
Cell: +30 69 44 64 62 04
(See attached file: Dilintas_George.vcf)

Vadivel Mahadevan ---16/09/2014 07:44:37---Hello Dr. Georgios,

From: Vadivel Mahadevan <vadivelmahadev@gmail.com>
To: materials-welding@googlegroups.com
Date: 16/09/2014 07:44
Subject: Re: [MW:21905] SS Filler wire selection
Sent by: materials-welding@googlegroups.com

---

Hello Dr. Georgios,
 
Can I use the same ER316L for joining, CF3 with F316L combination.
Do we call this as a Dissimilar joint?
I presume it is not, as it falls in the same P No., but some seniors in my organisation says it is a dissimilar metal, hence ER309LMo. to be used instead of ER316L.
 
 
Regards
Vadivel. M

On Wednesday, September 10, 2014 12:09:36 PM UTC+5:30, George Dilintas wrote:

I would say YES
best regards

Dr. Georgios Dilintas

Authorized Nuclear Inspector
Authorized Inspector Supervisor


I&F REGIONAL TECHNICAL MANAGER
BUREAU VERITAS HELLAS

Tel: +30 210 40 63 113/4
Fax: +30 210 40 63 118
Cell: +30 69 44 64 62 04
(See attached file: Dilintas_George.vcf)

This message contains confidential information. To know more, please click on the following link: http://disclaimer.bureauveritas.com 

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm

The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

This message contains confidential information. To know more, please click on the following link: http://disclaimer.bureauveritas.com