Dear,
pls refer Sec IX QW-194 VISUAL EXAMINATION —
PERFORMANCE test coupons shall show no cracks and complete joint penetration with complete fusion of weld metal and base metal.
So your performance test coupon was fail due to lack of penetration so additional test coupon is required as per sec IX. and why you test this failed test coupon for procedure.
Regards
Suryakant
On Mon, Sep 22, 2014 at 7:54 AM, Ravikumar, Thattekere Siddappa <travikumar@flowserve.com> wrote:
--Dear Experts
In our company are in process of pipe to pipe SS316 MOC Procedure and welde rqulification Pipe dia 250 X12thickX150L Each pice joined with MIG process, Visually and also after RT clearly says Lack of penetration even Though our Internal inspector recommended to go for Mechanical test,
In mechanical they have cut the pieces where ever the LOP was not there in the weld joint, Portion was taken and results are meeting the valves .
Here this way can we accept this as procedure ,process and welder has passed the test as pe ASME Sec IX.
I need Experts opinion on this.
Regards
RKTS
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
No comments:
Post a Comment