USE 98%ARGON + 2% O2 FOR SS SOLID WIRE
THANKS & BEST REGARDS
KG.PANDITHAN, AWS-CWI, CSWIP 3.1
CONSULTANT-WELDING & QUALITY
On Wed, Sep 24, 2014 at 10:56 AM, Vadivel Mahadevan <vadivelmahadev@gmail.com> wrote:
--Dear Experts,Thanks for your view.Mr. Pradip,I am using Sheilding medium - 80% Argon & 20% CO2Welding position is 2FR and the fillet weld arrangement is shown in the attached file.Welding is done on fully mechanised(automatic) machine.I have done a Pipe to plate joint in which I have used only 16-18V and the pipe schedule is Sch.80-2"pipe.Mr. Sayee,As you said, I experienced the same in CS and SS material.I didnt come across LOF in CS, whereas in SS it is so.Experts,Can you please tell me the basic difference an dhow to identify Short circuiting & spray transfer mode. How can I switch over.RegardsVadivel. M
On Wednesday, September 24, 2014 9:08:25 AM UTC+5:30, Sayee Raghunathan wrote:VadivelShielding gas and inductance are most important factors without disregarding all others that Goswami metioned in his email.Note that due to sluggish nature of ss weld pool due to increased Ni and Cr contents in general implies lower weld pool fluidity and higher susceptibility for LOF than c-steel welding for example. Hence, check if these two (inductance and shielding gas with 2%o2 or Co2, more preferably a He gas mix giving hotter arc and correct weld bead profile) are correctly being applied before investigating other factors.RegardsSayee
On Tuesday, 23 September 2014, pgoswami <pgos...@quickclic.net> wrote:--Hi Vadivel,What're the welding parameters (including shielding gas) being used??. What's the welding position? Are the welders' qualified for all position welding?There're many subtle variables for GMAW, which play important roles between, procedure qualification and production welds.Please read this attachment to understand the basic. GMAW-S could be often problematic, especially for positional welding and the shielding gases involved. GMAW-P could be a better option in many instances. Modern machines have features like STT or Miller -RMD, which offers much better control. It's worth looking at , if you have such machines at your works.GMAW is an excellent process, but takes time to produce results, which temps the fabricators to switch to FCAW. However it's not worth giving up at all.Thanks.Pradip Goswami, P.Eng,IWEWelding & Metallurgical SpecialistOntario, Canada
From: materials-welding@googlegroups.com [mailto:materials-welding@googlegroups.com] On Behalf Of Vadivel Mahadevan
Sent: Monday, September 22, 2014 8:28 AM
To: materials-welding@googlegroups.com
Subject: Re: [MW:21970] Lack of fusion in production welding - GMAW !!!--Hello Mr. George,My LOF is intermittent in majority of the jobs. However in fewer bodies it is continous. I can say 85:15 ratio of the Leaked weldsRegardsVadivel. M
On Saturday, September 20, 2014 4:10:26 PM UTC+5:30, George Dilintas wrote:Your LOF is intermittent of continuous?
Best regards
Dr Georgios Dilintas
Authorized Nuclear Inspector
Authorized Inspector Supervisor
HBS Regional Technical Manager
From: Vadivel Mahadevan [vadivel...@gmail.com]
Sent: 09/20/2014 02:19 AM MST
To: material...@googlegroups.com
Subject: [MW:21945] Lack of fusion in production welding - GMAW !!!
--Dear Experts,I face Lack of fusion problem in GMAW process in the production weld often.WPS qualified on short circuiting mode as the torch is designed to the same.But when I use the same current and voltage I come across Lack of fusionThe wire I use is ER316L of 1.2mm dia.Bare wire , volt not more than 19V.Now I started using 23 to 26V(Spray transfer mode volt range) to overcome my issue.Can you suggest what are the parameters I need to control to get a sound weld in the short circuiting mode.RegardsVadivel. M07829007400
To post to this group, send email to material...@googlegroups.com
To unsubscribe from this group, send email to materials-weld...@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-weld...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
This message contains confidential information. To know more, please click on the following link: http://disclaimer.bureauveritas.com
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
No comments:
Post a Comment