Re: [MW:21997] tube to tube sheet qualification.

For T/Tsht joint mock up qualification record is being used as WPS for The particular Joint configuration ,process and metallurgy Clubbing of Mock up qualion is not recoemnded
Hegde
--------------------------------------------
On Thu, 25/9/14, Mahesh Mirje <mahesh.mirje41@gmail.com> wrote:

Subject: [MW:21994] tube to tube sheet qualification.
To: materials-welding@googlegroups.com
Date: Thursday, 25 September, 2014, 7:50 AM

Dear experts,
Kindly suggest,
In tube to tube sheet welding I need to weld a pattern by
using both with filler and without filler, but as both are
essential variable, I need to qualify two different PQR, but
is it possible to make WPS with those two PQR, If yes, why
we don't combin two PQR WITH AND WITHOUT AND WITH PWHT.

Regards
Mahesh Mirje

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to
materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm

The views expressed/exchnaged in this group are members
personel views and meant for educational purposes only,
Users must take their own decisions w.r.t. applicable
code/standard/contract documents.
---
You received this message because you are subscribed to the
Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails
from it, send an email to materials-welding+unsubscribe@googlegroups.com.
For more options, visit
https://groups.google.com/d/optout.

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm

The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.