Hi,
SA 516 Grades all comes under (SPECIFICATION FOR PRESSURE VESSEL
PLATES,
CARBON STEEL, FOR MODERATE- AND LOWER TEMPERATURE SERVICE)
while ordering you have to mention the requirement in supplementary
S5. Charpy V-Notch Impact Test,then you will get LTCS.
On Thu, 27 Jan 2011 12:50:01 +0530 wrote
>
Dear All,
Can anybody tell me theMaterial A516Gr. 55 is C.S orLTCS?
Thank's,
>
>
>
>REMEMBER ME IN UR PRAYERS !
>*******(¨`·.·´¨) (¨`·.·´¨)********
>********`·.¸(¨`·.·´¨)..·´*********
>*********** `·.¸.·´************
>Best Regards,
>Ayaz Merhmood
>FEDC Dept.
>I-G-D HABSHAN-5 PROJECT
>DESCON ENGINEERING (UAE)
>Mobile :
+971-50-1926232
>www.descon.com.pk
>
>
From: yogesh
>To: Materials & Welding
>Sent: Thu, January 27, 2011 10:22:53 AM
>Subject: [MW:9512] CS in place of LTCS
>
>Can we replace LTCS with CS if temperature minimum expexted is
>-20DegC,process fluid;Coolwing water???
>
>--
>To post to this group, send email to materials-
welding@googlegroups.com
>To unsubscribe from this group, send email to materials-
welding+unsubscribe@googlegroups.com
>For more options, visit this group's bolg at
http://materials-welding.blogspot.com/
>The views expressed/exchnaged in this group are members personel views
and meant for educational purposes only, Users must take their own
decisions w.r.t. applicable code/standard/contract documents.
>
--
>
To post to this group, send email to materials-welding@googlegroups.com
>
To unsubscribe from this group, send email to materials-
welding+unsubscribe@googlegroups.com
>
For more options, visit this group's bolg at http://materials-
welding.blogspot.com/
>
The views expressed/exchnaged in this group are members personel views
and meant for educational purposes only, Users must take their own
decisions w.r.t. applicable code/standard/contract documents.
>
Dear Sir,
Thanking You,
Honesty is the best Policy
With Warm Regards,
Muthu Barathi P
Mobile No:00962788269821 (Jordan)
00962775401951
 |
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
No comments:
Post a Comment