No need if it is a support welded on the pipe.But if u welded like end plate (groove+fillet) need.
Thanks & Regards,
(Karthik)
Karthikeyan.S QA/QC Manager Getabec Energy Co.,Ltd. 379,Moo6,Soi8,Nikhomphatana, Rayong-21180, Thailand. Phone: 0066 38 897035-8 (Off) Fax: 0066 38 897034 Hand Phone: 0066 892512282
--- On Wed, 1/26/11, yoga nandhan <yoganandhan@gmail.com> wrote:
From: yoga nandhan <yoganandhan@gmail.com>
Subject: [MW:9489] Purging Gas for Fillet Weld
To: materials-welding@googlegroups.com
Date: Wednesday, January 26, 2011, 6:16 PM
Can anyone please clarify, for Fillet weld to be carried out in a S.S Pipe (4.5mm wall thickness) to support joint with GTAW Process. Is it required to give Purging Gas in pipe. (as per Clause 7.5 of API582. (attached)). Pipe Material: SA312 TP316/316L Support Material: SA240TP316/316L Thickness: 4.5 mm Max. Thanks in advance.
Best Regards, Yoganandhan Palaniappan -- To post to this group, send email to materials-welding@googlegroups.com To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com For more options, visit this group's bolg at http://materials-welding.blogspot.com/ The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
|
--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at
http://materials-welding.blogspot.com/ The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
No comments:
Post a Comment