Skip to main content

[MW:9485] Re: AWS CWEng

Specification for the Qualification of Welding Engineer
http://www.aws.org/certification/docs/B5.16-2006.pdf

Sample Questions for AWS Certified Welding Engineer Examinations–
Parts 1 and 2
http://www.aws.org/certification/docs/cert2711.pdf

Recommended Reference Materials
http://www.aws.org/certification/CWEng/references.pdf

Answer Key for AWS Certified Welding Engineer Examination Sample
Questions – Parts 1 and 2
http://www.aws.org/certification/docs/cert2712.pdf


On Jan 26, 11:03 am, Suresh <bobsures...@gmail.com> wrote:
> Hii
>
> You should contact to Mr.Ed Standiford (Certified CWE) .His Mail ID :
> weldi...@gmail.com , he will answer you ....
>
> Regards
>
> Suresh
>

>
> On Tue, Jan 25, 2011 at 7:54 AM, Zul <muhdhafizu...@gmail.com> wrote:
> > Dear all,
> > Is anyone here AWS Certified Welding Engineer?
> > I have passed Part 1 and 2 exams. Now preparing for the Part 3 and 4.
> > Can someone tell me what questions are normally asked in the Part 3
> > and Part 4 exam? Any sample questions?
> > Pls tell me more about Part 4, since I got no information on that.
> > Part 4 is practical welding and its application.
> > Which books should I refer best for the exams?
> > Pls advise.
>
> > Rgds,
> > Zul

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.

Comments

Popular posts from this blog

Materails FAQs

Q: What are equivalents for standard Q 235 B (and Q 235 A) for U-channels? (asked by: boris.vielhaber@vait.com) A: DIN Nr. = 2393 T.2, 2394 T.2, EN 10025 W. Nr. DIN 17007 = 1.0038 Design DIN 17006 = RSt 37-2, S235JRG2 (Fe 360 B) Q: What is St DIN 2391 BK material? (asked by: dmcandrews@automaticstamp.com) A: Precision steel tubes, cold-finished/hard. Q: What is C.D.W. Boiler Tube? (asked by: montydude123@yahoo.com) A: Cold Drawn Welded Boiler Tube. Q: WHAT IS W.Nr. 1.4301? PLS TELL US IN EASY LANGUAGUE (asked...

[MW:36169] Cold Bending Qualification

Dear Experts,  Can anyone share the inspection requirements or a qualification procedure for cold bending? Our client spec states only the requirements for induction bending and would like to know your opinion on the cold bend inspection requirements. The code of construction is B31.3, Max. 5D bends, A106 SS 316L.  Thanks in Advance. -- https://materials-welding.blogspot.com/ https://www.linkedin.com/groups/122787 --- You received this message because you are subscribed to the Google Groups "Materials & Welding" group. To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com . To view this discussion visit https://groups.google.com/d/msgid/materials-welding/1be61cc3-e9c9-4a5f-834d-e8485e248432n%40googlegroups.com .

[MW:30043] Weep hole

If weep hole is not provided in dummy pipe before welding What will happen??? -- https://materials-welding.blogspot.com/ https://www.linkedin.com/groups/122787 --- You received this message because you are subscribed to the Google Groups "Materials & Welding" group. To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com . To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/da251ee6-fa7f-4851-b876-cdb3834ae341%40googlegroups.com .