Skip to main content

Re: [MW:9540] hiiiiiii

By Materials & Welding
Dear Amit
I have to add further to this
a) One suitable area will be welding specialist in arc weldings and solid state weldings.
This needs to you getting shop floor or site exposures to various welding processes. You have to take employment to project management companies like L&T etc
b) Welding Inspection . At first you may have to work as a inspector latter if you achieve level-3 degrees in UT, RT or Dp you can start inspection agency of your own or you may get associated with Lyords BVQI etc
c) Welding machine manufacturers . This line is undergoing breakthrough technology changes like cambas speed arch etc.
d) Welding research - Government research firms like WRI Trichi, ARCi Hydrebad , Jadavpur University etc
e) You start your own factory with GMAW and SMAW facility . This is  Good line because there is a dearth of good fabrication units specially in the eastern part of India.
With Regards
Dr Arijoy Roy
R&D Telcon Jamshedpur.

--- On Fri, 28/1/11, murugesan jeyaraman <jmurugesan@gmail.com> wrote:

From: murugesan jeyaraman <jmurugesan@gmail.com>
Subject: Re: [MW:9531] hiiiiiii
To: materials-welding@googlegroups.com
Date: Friday, 28 January, 2011, 8:32 AM

Hi Amit
 
AWS offers many certification on welding, Which certification do you want to take depends upon what is your motto by getting the certification..
 
There are certification for welder, welding inspector, welding engineer and welding educator and more...
 
Being a M.tech in welding,  you may want to work as welding engineer, that of course does not need any certification, but to begin with you will have to work as welding engineer with fabrication industries doing value added products like Boiler pressure parts, pressure vessels, heat exchangers or process piping. You may work with consultants also. (I think this should be your right direction).
 
 
Secondly, you may wish to work as a welding inspector, Even though it gets a good salary package abroad,  but do not neccessarily to be a welding engineering post graduate  of IIT calibre. You will feel down to work as welding inspector. All it takes a diploma and welding inspection certification, this would suffice to be a welding inspector.
 
Welding educator - to work in certification organisations conducting all these certification courses.
You will get all the information from AWS website.
Thanks
 
Murugesan

On Wed, Jan 26, 2011 at 4:52 PM, amit singh <amit086@gmail.com> wrote:
hello frnds..
i am doing M Tech From IIT Roorkee, in welding engineering specialisation.
I want to take "AWS  Welding certificate".
can anyone plz suggest me, how we should apply for that and what is the procedure to get it.
i will be very thankful of him.
plz inform on
 amit086@gmail.com



--

Thanks&Regards:

Amit Kumar Singh
M.Tech (Welding Engineering)
IIT Roorkee, India

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.

Comments

Post a Comment

Popular posts from this blog

Heat tint (temper) colours on stainless steel surfaces heated in air // Heat tint

By Materials & Welding
Introduction The colour formed when stainless steel is heated, either in a furnace application or in the heat affected zone of welds, is dependent on several factors that are related to the oxidation resistance of the steel. The heat tint or temper colour formed is caused by the progressive thickening of the surface oxide layer and so, as temperature is increased, the colours change.   Oxidation resistance of stainless steels However, there are several factors that affect the degree of colour change and so there is no a single table of colour and temperature that represents all cases. The colours formed can only be used as an indication of the temperature to which the steel has been heated. Factors affecting the heat tint colours formed Steel composition The chromium content is the most important single factor affecting oxidation resistance. The higher the chromium, the more heat resistant the steel and so the development of the heat tint colou...
Post a Comment
Read more

Materails FAQs

By Materials & Welding
Q: What are equivalents for standard Q 235 B (and Q 235 A) for U-channels? (asked by: boris.vielhaber@vait.com) A: DIN Nr. = 2393 T.2, 2394 T.2, EN 10025 W. Nr. DIN 17007 = 1.0038 Design DIN 17006 = RSt 37-2, S235JRG2 (Fe 360 B) Q: What is St DIN 2391 BK material? (asked by: dmcandrews@automaticstamp.com) A: Precision steel tubes, cold-finished/hard. Q: What is C.D.W. Boiler Tube? (asked by: montydude123@yahoo.com) A: Cold Drawn Welded Boiler Tube. Q: WHAT IS W.Nr. 1.4301? PLS TELL US IN EASY LANGUAGUE (asked...
21 comments
Read more

The Schaeffler and Delong diagrams for predicting ferrite levels in austenitic stainless steel welds

By Materials & Welding
Introduction Ferrite is important in avoiding hot cracking in during cooling from welding of austenitic stainless steels. 'Constitution diagrams' are used to predict ferrite levels from the composition by comparing the effects of austenite and ferrite stabilising elements. The Schaeffler and Delong diagrams are the original methods of predicting the phase balances in austenitic stainless steel welds. Nickel and chromium equivalents A 'nickel equivalent' is calculated for the austenite stabilising elements and a 'chromium equivalent' ferrite stabilising elements. These are used as the axes for the diagrams, which show the compositional equivalent areas where the phases austenite, ferrite, martensite (and mixtures of these) should be present. Although intended to show the phase balance of weld fillers, these diagrams can also be used to illustrate the phase balance of the 'parent' material. There are different diagrams for dif...
Post a Comment
Read more