Re: [MW:9494] impact test specimens

Dear Mr Reddy,

                       You have to take all the required CVN specimens at all the locations specified. 

@12 o'clock- WCL,FL, Fl+2 each 3 specimens

@3o'clock & 6o' clock also same.

This is taken to know the material properties at each position.

2011/1/26 VENKATA SWAMI REDDY KARRI <kvsreddy777@gmail.com>

Dear All,

 

Acording to our spec " Impact test sets shall be taken from 12 o'clock, 3 o'clock and 6 o' clock at

centre of weld

fusion line

+2mm from fusion line in the parent metal

 

Each test set shall include 3 specimens"

 

 

I have a doub't that we have to take the specimens  ex:   for centre of the weld 3specimens need to take at 12 o' clock  or 1 from 12,3and 6o'clock respectivly

 

--

 

Best Regards,

K.V.S.Reddy,
Q.C.Inspector(Piping&Welding),
BS-132 Project,
SKEC Eng& Con Ltd.,
Postbox no-55653,
Sabahiya-54567,
Kuwait.
kvsreddy777@gmail.com,karryswamireddy@yahoo.com,
Ph:00965-94414396.

PleaseSave a tree. Don't print this e-mail unless it's really necessary

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.

--

regards,

Harish.

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.