Hi
I think NOT required for Fillet welds especially pipe to supports .
Suresh
On Thu, Jan 27, 2011 at 8:07 AM, Karthik <karthik6684@yahoo.com> wrote:
No need if it is a support welded on the pipe.But if u welded like end plate (groove+fillet) need.
Thanks & Regards,(Karthik)Karthikeyan.SQA/QC ManagerGetabec Energy Co.,Ltd.379,Moo6,Soi8,Nikhomphatana,Rayong-21180,Thailand.Phone: 0066 38 897035-8 (Off)Fax: 0066 38 897034Hand Phone: 0066 892512282
--- On Wed, 1/26/11, yoga nandhan <yoganandhan@gmail.com> wrote:
From: yoga nandhan <yoganandhan@gmail.com>
Subject: [MW:9489] Purging Gas for Fillet Weld
To: materials-welding@googlegroups.com
Date: Wednesday, January 26, 2011, 6:16 PM
--
Can anyone please clarify, for Fillet weld to be carried out in a S.S Pipe (4.5mm wall thickness) to support joint with GTAW Process. Is it required to give Purging Gas in pipe. (as per Clause 7.5 of API582. (attached)).
Pipe Material: SA312 TP316/316L
Support Material: SA240TP316/316L
Thickness: 4.5 mm Max.
Thanks in advance.
Best Regards,
Yoganandhan Palaniappan
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
--
Thanks & Best Regards,
Suresh
Mobile No: 91-92 92 905 905
--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
No comments:
Post a Comment