Re: [MW:24439] Acceptance for bottom plate of storage tank (API 650)

Mr.bala murugan,

                             

             you are giving the wrong reference, this statement is not mentioned in the api 650, please clarify your reference,

On Thursday, March 3, 2016 at 3:25:33 PM UTC+3, bala murugan wrote:

Dear Friend,

   As per API 650, Cls 7.5 it was mention in dimension tolerance topic
that The bulging of bottom plate shall not exceed .25% of dia of tank
(for tank dia <40m) unless otherwise mentioned. 100mm max. for tank
dia >40m.


Thanks,
Bala
On 2/22/16, Vishal Sharma <vishalsharm...@gmail.com> wrote:
> Dear Experts,
>
> We found 42 mm distortion in bottom plate after welding with shell. Is it
> acceptable? Please share reference standard.
> Please note tank fabrication is going on within shop.
>
> Br,
> Vishal Sharma
>
> --
> You received this message because you are subscribed to the Google Groups
> "Materials & Welding" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to materials-weld...@googlegroups.com.
> To post to this group, send email to material...@googlegroups.com.
> Visit this group at https://groups.google.com/group/materials-welding.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/materials-welding/CAAK1segupjbGRtScdgV3DhDP4k-7sx2y_NjnfcBC8fovg-g6ag%40mail.gmail.com.
> For more options, visit https://groups.google.com/d/optout.
>

--
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
Visit this group at https://groups.google.com/group/materials-welding.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/1019f078-7dca-47b1-ad68-63c0941bed0c%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.