Re: [MW:24438] Requirement of PWHT after repair in P91 after SR

GO WITH MR.DILINTAS COMMENTS

THANKS & BEST REGARDS,

KG.PANDITHAN, IWE,  AWS-CWI, CSWIP 3.1,

CONSULTANT-WELDING & QUALITY

On Sat, Mar 5, 2016 at 10:35 AM, Shujath Asim <shujath.asim@gmail.com> wrote:

Its not that necessary but do hardness test for full joint to check the heating properties.
Follow the client instructions ad well.

--
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
Visit this group at https://groups.google.com/group/materials-welding.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/9ff96a94-05aa-4160-bee6-318637bd60c9%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

--
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
Visit this group at https://groups.google.com/group/materials-welding.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAJzm4eOK_LbNncbeGdCfZgxPKR7iiEznq44XV6RNuZb1ryuP%2BQ%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.