Monday, May 24, 2010

[MW:5229] Re: LR A GRADE MATERIAL

Dear Manoj,

LR Grade A material is a structural rolled steel grade according to
Chapter 3 section 2 of the Lloyd's Register Rules for Manufacture,
Testing and Certification of Materials.
This material has the following chemical composition: C max. 0.21% ;
Mn min. 2.5 x %C ; Si max. 0.50% ; P max. 0.04% ; S max. 0.04%
Mechanical properties are: Yield Strength min. 235 MPa ; Tensile
Strength 400 - 490 MPa ; Elongation min. 22% and has no Chapy-V impact
requirements.

Best Regards,

Herman Pieper

On 23 mei, 18:00, manoj john <manojac...@gmail.com> wrote:
> Dear All
>
> Can anybody give info about LR  A grade material
>
> Thanks & Regards.
> Manoj
>
> --
> To post to this group, send email to materials-welding@googlegroups.com
> To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
> For more options, visit this group's bolg athttp://materials-welding.blogspot.com/
> The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.

No comments:

Re: [MW:34832] Inquiry about Single Bevel with Back Grinding

Dear Uday, As per your question that one is called with backing only,Simple both side you are welding it is backing with strip or without st...