[MW:5223] Re: Technical Qery regarding welder performance qualification for ASME Sec ix QW-452.1(b)

Dear Mr. Asad,

If welder is qualified in position 6G he is qualified for all the
position,
If welder do the welding 13mm with min 3 layers, he is qualified to
weld unlimited thickness but single pass should not be more than 13mm
thick.

Regards
Israr ahmed

On May 23, 8:38 am, asad azmi <azmiasada...@gmail.com> wrote:
> Dear All,
>
> *Can you please elobrate the meaning of  word "ALL"   and  "1/2 ( 13)  and
> over with a minimum of three layers"  from the table QW - 452.1(b) .*
> **
> *also what is the  thickness of weld metal qualified if the welder is
> qualified by BEND Test.( QW-452.1(a))*
> **
> Thanks & Regards
> **
> *Asad Azmi*
>
> --
> To post to this group, send email to materials-welding@googlegroups.com
> To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
> For more options, visit this group's bolg athttp://materials-welding.blogspot.com/
> The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.