You could use a seamless pipe of API 5L X56,X60,X65 for the WPS
qualification.
Regards
On May 22, 3:57 pm, Rajpal Dhillon <rajpal.ban...@gmail.com> wrote:
> Dear Members,
> We are to weld the A860 WPHY 65 Flow Tee to A333 Gr6 pipe.Our TPIA is asking
> for a separate PQR for this.We already have a PQR fpr A333 Gr6. Our main
> concern is if we onduct a PQR fpr A860WPHY TO A333Gr6 we will loose
> one Flow Tee which we have imported from ITALY.To get a new Floe tee it will
> take minimum three months which we can not afford at this point of time. Is
> there any way out.
>
> Rajpal Singh Dhillon
>
> --
> To post to this group, send email to materials-welding@googlegroups.com
> To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
> For more options, visit this group's bolg athttp://materials-welding.blogspot.com/
> The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
Comments