hi dear sir
please be informed that as per API 5L STD.
The tolerances for straightness shall be as follows.
a) The total deviation from a straight line, over the entire pipe length, shall be ≤ 0,2 % of the pipe length,
b) The local deviation from a straight line in the 1,0 m (3.0 ft) portion at each pipe end shall be
≤ 4,0 mm (0.156 in).
a) The total deviation from a straight line, over the entire pipe length, shall be ≤ 0,2 % of the pipe length,
b) The local deviation from a straight line in the 1,0 m (3.0 ft) portion at each pipe end shall be
≤ 4,0 mm (0.156 in).
best regards
`h.sarpasi
On Wednesday, December 13, 2017, 10:45:41 AM GMT+3:30, Rajendra Jadhav <raj04aug@gmail.com> wrote:
Dear Sir,
-- Pls provide me the Straightness Criteria for APL 5L X52M.
waiting for replay.
Regards,
Rajendra Jadhav
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
Visit this group at https://groups.google.com/group/materials-welding.
For more options, visit https://groups.google.com/d/optout.
No comments:
Post a Comment