Wednesday, December 13, 2017

[MW:27183] CRA-Weld overlay

Dear Gents,

How much pipe length (for welding) is require for Corrosion Resistant Weld overlay Procedure qualification test per ASME Sec IX?

Per QW-453: required length is 150mm. Please tell me this entire length is to be welded.

Looking forward your reply

Regards,
Venkkatesh Gopalakrishnan.

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
Visit this group at https://groups.google.com/group/materials-welding.
For more options, visit https://groups.google.com/d/optout.

No comments:

Re: [MW:35289] Welding consumable for S355J2WP material

S355 J2 WP  is a weathering structural steel  It has better atmospheric corrosion resistance. Use E 8018 - W1/W2  Electrodes This is regular...