Wednesday, December 13, 2017

Re: [MW:27183] combination process wps can be used only single process - reg

As I understand from information that you have a WPS qualified for P1 to P8 with GTAW (8 mm)+SMAW(11.06 mm) for base metal thickness range from 1.5 to 19.06 mm and you want to use this WPS for welding by GTAW process only.

Answer is yes. You can use this WPS for welding by GTAW process [refer below snap shot of QW-200.4(a)]



On 13-Dec-2017 10:00 AM, "Amul Raj" <win.amul@gmail.com> wrote:
Dear Experts,

We have an dissimilar WPS (P1 & P8) with combination process (GTAW - 8mm Max +SAMAW - 11.06 mm Max) upto 19.06 mm Thk 

The same WPS can be used for single process only (GTAW Upto 8 mm Max)

Please advise me with reference 


Regards

Amul Raj T

  

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
Visit this group at https://groups.google.com/group/materials-welding.
For more options, visit https://groups.google.com/d/optout.

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
Visit this group at https://groups.google.com/group/materials-welding.
For more options, visit https://groups.google.com/d/optout.

No comments:

Re: [MW:35289] Welding consumable for S355J2WP material

S355 J2 WP  is a weathering structural steel  It has better atmospheric corrosion resistance. Use E 8018 - W1/W2  Electrodes This is regular...