Re: [MW:27216] pipeline hydrotest package index

Pradeep,

For pipeline, refer the below sample (Minimum Requirement)

1.       Pipeline Hydrostatic test diagram

2.       Pipeline schematic diagram and P&ID

3.       Pipeline alignment sheet/ ISO drawing

4.       Line list

5.       Pipe book and tie in weld

6.       Welded sections map (pipe line)

7.       Pre-test critical component removal and test preparation

8.       Punch list

Released for cleaning

9.       Pipeline cleaning inspection

Released for Gauging

10.   Pipe Gauging inspection

Released for filling and flooding

11.   Water analysis report

12.   Pipeline flooding &filling inspection

Released for hydro test

13.   Temperature record (temperature and pressure for stabilization)

14.   Pipeline pressure /volume log(for 50% test pressure)

15.   Air content calculation report

16.   Pressure/temperature log (for100% test pressure)

17.   Pressure/temperature log (for pressure holding)

18.   Pipeline hydrostatic test report

19.   Pipeline dewatering report

20.   Pipeline post test critical components reinstatement

21.   Caliper pigging

22.   Pipeline swabbing check

23.   Pipe drying report

Released for Purging

24.   Final Package Acceptance (Singing of Sub-con/Contractor/Client)

Thanks with warm regards,

Pramodh M.R

+919633251371 

+965 94127821

If We Work With Determination And Perfection, Success Will Follow

On Friday, December 22, 2017, 9:17:26 AM GMT+3, Sajeev P <sajeevlaxmi@gmail.com> wrote:

Hi Pradeep,

Please refer attached Document.

Regards,

Sajeev P.

On Thu, Dec 21, 2017 at 8:06 AM, Pradeep kumar hormis <pkhormis@gmail.com> wrote:

Sirs

Could anyone can give me a sample copy of pipeline Hydrotest package index (contents).

Thanks & Regards

PRADEEPKUMAR HORMIS

Mob: +966-58 16 20 710

 

 

 

--
https://materials-welding. blogspot.com/
https://www.linkedin.com/ groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@ googlegroups.com.
Visit this group at https://groups.google.com/ group/materials-welding.
For more options, visit https://groups.google.com/d/ optout.

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
Visit this group at https://groups.google.com/group/materials-welding.
For more options, visit https://groups.google.com/d/optout.