Re: [MW:24449] Welding process selection.

Hi,

In that case, you may submit you approved WPS/PQR documents to your Client which shows strength and soundness of weld.

Also you can make a comparison table for both these processes with productability.

regards,

LALU 

On Tue, Mar 8, 2016 at 1:04 PM, Dinesh Somwanshi <som.din@gmail.com> wrote:

Dear sir,

I need 1 help from you that as following.

1. we are doing bridge fabrication for L & T as per indian standard.For fillet stiffener welding they have approved SMAW .

During SMAW we found numer of undercuts & slow process in welding.

2. We have recommended to use FCAW E71T-C welding process instead of SMAW E7018 . They are partially agreed & asking to submit that process comparison to choose FCAW to ensure that it fullfill the strenght of weld.

Please share your opinion.

DINESH VITTHAL SOMWANSHI

BACHELOR IN MECHANICAL ENGINEER

AUTHORIZED WELDING / NDT / PAINTING INSPECTION PERSONNEL,

AWS - CWI , CSWIP 3.1

BGAS  Gr 2 / 3

NDT II -UT , RT , MT , PT, VT

00919881344135

असो द्यावी दया तुमच्या लागतसे पाया.

Pray for others, sometime, You might never need to pray for yourself again.....

--
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
Visit this group at https://groups.google.com/group/materials-welding.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAELgRrV5ynQAB-jEQ3Jq4mFfb5ccQJXgkTZytBW6hFLuR%3DBvBA%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.

--
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
Visit this group at https://groups.google.com/group/materials-welding.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAOwU13v4L9g3XWzLwHSrrm5LJD8VjoumMMXW86hJq%2BwNk3JnwA%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.