If u r doing by ASME B31.3, then u have to refer B31.3 acceptance criteria. Chapter 6.
Thanks & Regards
M
QW301.2 (last pragraph)
The performance test may be terminated at any stage of
the testing procedure, whenever it becomes apparent to the
supervisor conducting the tests that the welder or welding
operator does not have the required skill to produce satisfactory
results.
So it is a manufacturer's responsibilty to qualify a welder/operator's qualifications to meet the code specification and acceptance criteria as well as to the company's quality system.I hope it is clear to you.Thanks & regards,(Karthik)Karthikeyan.SQA/QC ManagerGetabec Energy Co.,Ltd.379,Moo6,Soi8,Nikhomphatana,Rayong-21180,Thailand.Phone: 0066 38 897035-8 (Off)Fax: 0066 38 897034Hand Phone: 0066 892512282
--- On Wed, 10/27/10, limesh M <limesh78@gmail.com> wrote:
Subject: Re: [MW:7858] WQT-Visual Acceptance Criteria Issue
To: materials-welding@googlegroups.com
Date: Wednesday, October 27, 2010, 12:40 PM
Dear Raghuram Sir & Karthik sir,Thank you very much for the prompt reply.Based on this only I can ask remaining thing in my mind.Dear All,I reviewed following clauses of ASME BPV SEC IX.QW-142 Special Examinations for Welders
Radiographic or ultrasonic examination per QW-191may be substituted for mechanical testing of QW-141 for
groove-weld performance qualification as permitted in QW-304 to prove the ability of welders to make sound
welds.
QW-143 Examination for Welding Operators
Radiographic or ultrasonic examination per QW-191 may be substituted for mechanical testing of QW-141 for groove weld performance qualification as permitted in QW-305 to prove the ability of welding operators to make sound welds.
QW-144 Visual Examination
Visual examination as described in QW-194 is used to determine that the final weld surfaces meet specified quality
standards.
QW-194 Visual Examination — Performance
Performance test coupons shall show complete joint penetration with complete fusion of weld metal and base metal.
QW-302.2 Volumetric NDE.
When the welder or welding operator is qualified by volumetric NDE, as permitted in QW-304 for welders and QW-305 for welding (10) operators, the minimum length of coupon(s) to be examined shall be 6 in. (150 mm) and shall include the entire weld circumference for pipe(s), except that for small diameter pipe, multiple coupons may be required, but the number need not exceed four consecutively made test coupons. The examination technique and acceptance criteria shall be in accordance with QW-191.
QW-191 Volumetric NDE
QW-191.1 Radiographic Examination
QW-191.1.1 Method.
The radiographic examination in QW-142 for welders and in QW-143 for welding operators shall meet the requirements of Article 2, Section V,except as follows:
(a) a written radiographic examination procedure is not required. Demonstration of density and image quality
requirements on production or technique radiographs shall be considered satisfactory evidence of compliance with
Article 2 of Section V
(b) final acceptance of radiographs shall be based on the ability to see the prescribed image and the specified
hole of a hole-type image quality indicator (IQI) or the designated wire of a wire-type IQI. The acceptance standards
of QW-191.1.2 shall be met.
QW-191.1.2.3 Production Welds. The acceptance criteria for welders or welding operators who qualify on
production welds by radiography as permitted in QW-304.1 or QW-305.1 shall be per QW-191.1.2.2.
My query is that, QW 194 is dealing with complete joint penetration and fusion only. What is the acceptance criteria for cap and root under cut,arc strikes,bead profile?Why ASME BPV is silent on remaining defects ?
Regards,
Limesh
On Wed, Oct 27, 2010 at 8:44 AM, Bathula Raghuram (Mumbai - PIPING) <R.Bathula@ticb.com> wrote:
QW302.4, QW194
"Performance test coupons shall show complete joint penetration with complete fusion of weld metal and base metal".
From: materials-welding@googlegroups.com [mailto:materials-welding@googlegroups.com] On Behalf Of limesh M
Sent: Wednesday, October 27, 2010 10:03 AM
To: Materials & Welding
Subject: [MW:7847] WQT-Visual Acceptance Criteria Issue
Dear All,
Design Code - ASME B31.3
Welding Code - ASME BPV SEC IX
I want to qualify some welders and welding operators based on ASME BPV SEC IX.
What is the visual acceptance criteria as per code (Suppose there is no client specification regarding this matter)?
Please mention the relevant code clauses for reference.
Regards,
Limesh
--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
No comments:
Post a Comment