Thursday, October 28, 2010

RE: [MW:7905] 9000 lbs thredolet

Check the attachment for #9000 Socket welded outlets, Threaded component are generally available/used up to #6000 only as stated by Mr Joseph

 

From: materials-welding@googlegroups.com [mailto:materials-welding@googlegroups.com] On Behalf Of Bisso, Giuseppe
Sent: Thursday, October 28, 2010 11:57 AM
To: materials-welding@googlegroups.com
Subject: R: [MW:7902] 9000 lbs thredolet

 

As far as I know  threadolets s 9000 are not  generally allowed  (only socklolet or weldolet) : here the risk  of threading for high pressuie levels .

 

Joseph B.

 


Da: materials-welding@googlegroups.com [mailto:materials-welding@googlegroups.com] Per conto di Ramprasad Chari
Inviato: giovedì 28 ottobre 2010 8.21
A: materials-welding@googlegroups.com
Oggetto: Re: [MW:7901] 9000 lbs thredolet

 

Mr Saurabh,

Thanks but Bonneyforge provides dimensions upto 6000LBS and not 9000 Lbs

Regards

aarpee

On Thu, Oct 28, 2010 at 11:28 AM, <ppefit@gmail.com> wrote:

Dear Mr. Aarpee,
You can find all the dimensions on bonny forge website.
Saurabh
Sent on my BlackBerry® from Vodafone


-----Original Message-----
From: Aarpee <ramprasad.chari@gmail.com>
Sender: materials-welding@googlegroups.com
Date: Wed, 27 Oct 2010 22:40:03
To: Materials & Welding<materials-welding@googlegroups.com>
Reply-To: materials-welding@googlegroups.com
Subject: [MW:7898] 9000 lbs thredolet

Can someone provide dimensions for 1/2" & 3/4" size 9000 Lbs
thredolet?
Thanks and Regards
Aarpee


No comments:

Re: [MW:34832] Inquiry about Single Bevel with Back Grinding

Dear Uday, As per your question that one is called with backing only,Simple both side you are welding it is backing with strip or without st...