This will increase paint consumption mainly due to the more anchorage.
regards,
pavainathan
On Wed, 27 Oct 2010 11:38:48 +0530 wrote
>Dear friends,
Blasting Grade required - SA2.5
Surface profile required - 40 - 70microns
If the surface profile crossing the required limit 70-
80microns then what will the effect on painting and what is the
reference code.Please guideme
--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
Best Regards,
Balan Vaithiyanathan
 |
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
No comments:
Post a Comment