Yes, I agree with Bonardo, the reference code for Olets must be mentioned.
Joseph
Da:
Inviato: giovedì 28 ottobre 2010 8.54
A:
Oggetto: Re: [MW:7909] 9000 lbs thredolet
Dear Colleagues :
It is a good behaviour to always refer back to standart first, before answering this kind of question.
Bonney-forge is a well-known manufacturer, but trust me if you compare their catalogue to Taylor-forge or Ladish or other manufacture there will be slight difference in dimensions. So, dont used their catalogue as basic of design.
Regarding this question, again the reference code for Olets is MSS-SP-97, and as far as I know, class 9000 is not mentioned in this standart - most probably due to Raghuram and Joseph argument below -
Regards
Bonardo
From: Bathula Raghuram (Mumbai - PIPING) <R.Bathula@ticb.com>
To: "
Sent: Thu, 28 October, 2010 1:34:34 PM
Subject: RE: [MW:7905] 9000 lbs thredolet
Check the attachment for #9000 Socket welded outlets, Threaded component are generally available/used up to #6000 only as stated by Mr Joseph
From:
Sent: Thursday, October 28, 2010 11:57 AM
To:
Subject: R: [MW:7902] 9000 lbs thredolet
As far as I know threadolets s 9000 are not generally allowed (only socklolet or weldolet) : here the risk of threading for high pressuie levels .
Joseph B.
Da:
Inviato: giovedì 28 ottobre 2010 8.21
A:
Oggetto: Re: [MW:7901] 9000 lbs thredolet
Mr Saurabh,
Thanks but Bonneyforge provides dimensions upto 6000LBS and not 9000 Lbs
Regards
aarpee
On Thu, Oct 28, 2010 at 11:28 AM, <ppefit@gmail.com> wrote:
Dear Mr. Aarpee,
You can find all the dimensions on bonny forge website.
Saurabh
Sent on my BlackBerry® from Vodafone
-----Original Message-----
From: Aarpee <ramprasad.chari@gmail.com>
Sender: materials-welding@googlegroups.com
Date: Wed, 27 Oct 2010 22:40:03
To: Materials & Welding<materials-welding@googlegroups.com>
Reply-To: materials-welding@googlegroups.com
Subject: [MW:7898] 9000 lbs thredolet
Can someone provide dimensions for 1/2" & 3/4" size 9000 Lbs
thredolet?
Thanks and Regards
Aarpee
--
To post to this group, send email to
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
This e-mail contains privileged and confidential information intended for the use of the addressees named above. If you are not the intended recipient of this e-mail, you are hereby notified that you must not disseminate, copy or take any action in respect of any information contained in it. If you have received this e-mail in error, please notify the sender immediately by e-mail and immediately destroy this e-mail and its attachments.
No comments:
Post a Comment