Dear;
you can refer sec 341 of b 31.13 for excess penetration.
From: KASHKOUSHA <kashkousha1@yahoo.com>
To: materials-welding@googlegroups.com
Sent: Mon, October 25, 2010 7:10:01 PM
Subject: Re: [MW:7791] EXCESS PENETRATION
Dear P.Mahendran
thanks for prompt reply but what clause no in b31.3
H.KASHKOUSHA From: mahendran p <pmahe_79@yahoo.co.in>
To: materials-welding@googlegroups.com
Sent: Mon, October 25, 2010 3:15:07 PM
Subject: Re: [MW:7788] EXCESS PENETRATION
Dear Kashkousa, Its depends on the wall thickness. for Example, if wall thk is <=6 mm then EP is 1.5mm >6 < =13mm the EP is 3 mm Thk & rgds, P.Mahendran --- On Mon, 25/10/10, KASHKOUSHA <kashkousha1@yahoo.com> wrote:
|
--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
No comments:
Post a Comment