Re: [MW:7861] Surface preparation and coating

Thanku for your reply Mr.Gole.The primer DFT- 75microns,midcoat coat- 75 microns,final coat- 75 microns.overall 225 microns.Most of the times the total DFT is exceeding 225microns and how to control this.Can you give some more clear picture,pls

On Wed, Oct 27, 2010 at 11:15 AM, BHARAT GOLE <bharatgole@hotmail.com> wrote:

If surface profile is more than acceptable limit then it may cause for rust rashing i.e high peaks may expose after paint curing/contraction will be rusted.
Actaully it depend upon the so many factors such as whole paint syetem and DFT etc

Bharat B. Gole

 

 

> Date: Tue, 26 Oct 2010 22:58:41 -0700
> Subject: [MW:7857] Surface preparation and coating
> From: nss2410@gmail.com
> To: materials-welding@googlegroups.com

>
> Dear friends,
> Blasting Grade required - SA2.5
> Surface profile required - 40 - 70microns
>
> If the surface profile crossing the required limit 70-
> 80microns then what will the effect on painting and what is the
> reference code.Please guideme
>
> --
> To post to this group, send email to materials-welding@googlegroups.com
> To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
> For more options, visit this group's bolg at http://materials-welding.blogspot.com/
> The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.