Re: [MW:24447] Welding process selection.

Hi Dinesh

Surprised that client is asking to prove the strength. The usage of the particular electrode and spec/lot certificate from the manufacturer should suffice. If you are doing field welding then you will have to prove quite differently as they may not approve fcaw with shielding gas. 

All the best

Sent from my Samsung device

-------- Original message --------
From: Dinesh Somwanshi <som.din@gmail.com>
Date: 08/03/2016 17:04 (GMT+08:00)
To: materials-welding <materials-welding@googlegroups.com>
Subject: [MW:24446] Welding process selection.

Dear sir,

I need 1 help from you that as following.

1. we are doing bridge fabrication for L & T as per indian standard.For fillet stiffener welding they have approved SMAW .

During SMAW we found numer of undercuts & slow process in welding.

2. We have recommended to use FCAW E71T-C welding process instead of SMAW E7018 . They are partially agreed & asking to submit that process comparison to choose FCAW to ensure that it fullfill the strenght of weld.

Please share your opinion.

DINESH VITTHAL SOMWANSHI

BACHELOR IN MECHANICAL ENGINEER

AUTHORIZED WELDING / NDT / PAINTING INSPECTION PERSONNEL,

AWS - CWI , CSWIP 3.1

BGAS  Gr 2 / 3

NDT II -UT , RT , MT , PT, VT

00919881344135

असो द्यावी दया तुमच्या लागतसे पाया.

Pray for others, sometime, You might never need to pray for yourself again.....

--
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
Visit this group at https://groups.google.com/group/materials-welding.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAELgRrV5ynQAB-jEQ3Jq4mFfb5ccQJXgkTZytBW6hFLuR%3DBvBA%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.