Tuesday, August 27, 2013

Re: [MW:18524] Inspection of Non metalic gaskets,? what to check? what to refer?

see http://www.wermac.org/gaskets/dim_gaskets_fl_series_a.html, which might be useful to you at least to some extent.

ವಂದನೆಗಳೊಂದಿಗೆ / Best regards,

Nandesh Kumar Arasappa

P.S. : Please don't print this e-mail unless you really need to.

--------------------------------------------
On Mon, 26/8/13, Srinivas Engr <srinivas.gmsrini@gmail.com> wrote:

Subject: [MW:18520] Inspection of Non metalic gaskets,? what to check? what to refer?
To: materials-welding@googlegroups.com
Date: Monday, 26 August, 2013, 10:29 PM

Dear All,

Pl advise me on above subject.
what are things to check when inspecting non metalic
gaskets, say rubber gaskets.
which codes to refer, for material & dimensional?

Advance Thanks
Best regards
Srinivasan.S.M




--

To post to this group, send email to
materials-welding@googlegroups.com

To unsubscribe from this group, send email to
materials-welding+unsubscribe@googlegroups.com

For more options, visit this group's bolg at http://materials-welding.blogspot.com/

http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm

 

The views expressed/exchnaged in this group are members
personel views and meant for educational purposes only,
Users must take their own decisions w.r.t. applicable
code/standard/contract documents.

---

You received this message because you are subscribed to the
Google Groups "Materials & Welding" group.

To unsubscribe from this group and stop receiving emails
from it, send an email to
materials-welding+unsubscribe@googlegroups.com.

For more options, visit https://groups.google.com/groups/opt_out.



--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm

The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/groups/opt_out.

No comments:

[MW:34920] Tubesheet Hole step

Hello Team, I have one question any tolerance given for tubesheet Hole step. Please do needful. Regards, AP  -- https://materials-...