[MW:18503] PMI of P11

Hello,

Can somebody tell me, why there is a difference in PMI reading when tested directly on consumable and when tested on deposition made on the P11 base metal.

Consumable- ER80S-B2 & E8018-B2

Reading directly on consumable - 1.5 Cr & 0.4 Mo

Reading on the deposition (P11 base metal) - 4.5 Cr & 1.2 Mo

Thanks,

Kiran

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
 
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/groups/opt_out.