Re: [MW:18510] Ferrite Content Check on root or final weld

Dear Mr Ankit

i) The weld ment Ferrite to be checked after final Weld However the depth at which the ferrite to be checked depends upon spec requirement

ii) For  to get Ferrite between 2-5 is very low hence generaly Nil Ferrite consumables are to be used (also Basic coated electrodes are being used) where you require to take extra precaution during welding to avoid Hot Crack(Shrinkage Crack)

 

Regards

Hegde P.B.

From: Ankit PAtel <ankit.patel@orientalindia.net>ence
To: materials-welding@googlegroups.com
Sent: Saturday, 24 August 2013 6:00 PM
Subject: [MW:18506] Ferrite Content Check on root or final weld

Dear Exerts,

 

Kindly suggest on following issue

We have a job on which ferrite content test is essential. we are welding with root run by GTAW & sub sequent layer by SMAW. Please confirm whether it is essential to check the ferrite content of the root or final weld.(top of the weld.)

Base Material-SA 240 TP 316L

Filler Wire/Electrode:- ER-316L & E-316L

Also our requirement is 2FN to 5FN kindly suggest any filler wire/Electrode manufacturer.

 

Regards

 

Ankit Patel Engineer Quality Oriental Manufacturers Private Limited A: P.C.C. Notified Area, Ranoli Station Road,  Ranoli -391 350 Baroda Gujarat India T: +91.265.223 1663/2232936 F: +91.265.223 0171 E:  ankit.patel@orientalindia.net  W: http://www.orientalmanufacturers.com

 

 

-- To post to this group, send email to materials-welding@googlegroups.comTo unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.comFor more options, visit this group's bolg at http://materials-welding.blogspot.com/http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.--- You received this message because you are subscribed to the Google Groups "Materials & Welding" group.To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.For more options, visit https://groups.google.com/groups/opt_out.