[MW:18546] RE: 18541] 4'',check valve bad surface finishing

Before even considering accepting it I would ask for that paint to be blast
off to see what is underneath. The flange appears to be connected to the
valve by a weld which should not be there.

Alan Denney
AKD Materials Consulting Ltd
8 Furber Street, London W6 0HE.
Tel: +44 208 748 0636
UK mobile: +44 7786 077125
NL mobile (temporary): +31 6 11 91 25 79


-----Original Message-----
From: materials-welding@googlegroups.com
[mailto:materials-welding@googlegroups.com] On Behalf Of Ezat Adel
Sent: 29 August 2013 15:15
To: materials-welding
Subject: [MW:18541] 4'',check valve bad surface finishing

Dear Expert,

could you please see attached image for 4'',check valve,A216 WCB received as
a new valve i have a doubt about the nuts area marking, if it's can occur
during casting process or this valves used before.
also the surface finishing in bad condition.
i am waiting your advice asap.

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to
materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at
http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=
anet_ug_hm

The views expressed/exchnaged in this group are members personel views and
meant for educational purposes only, Users must take their own decisions
w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups
"Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an
email to materials-welding+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/groups/opt_out.

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm

The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/groups/opt_out.