Re: [MW:18452] CVN Test Temperature Reduction AWS D1.1

-20-11.1=-31.1C

2013/8/17 nguyen anh tuan <tuanpvecc@gmail.com>

Dear Experts

 

I have question about using sub-sized specimen for CVN test

Testing temperature following specification   is -20^oc ,Plate thickness is 8mm and specimen sized is 10x5

My question How much temperature will apply for testing (AWS D1.1)

 

"4.36.7 When sub-sized specimens are required, and the

width of the specimen across the notch is less than 80%

of the base metal thickness, the test temperature shall be

reduced in conformance with Table 4.15, unless otherwise

specified in the contract documents

Thanks in advance

 

 

Tuan

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
 
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/groups/opt_out.

--

regards,

Harish.

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
 
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/groups/opt_out.