[MW:18450] Inspection of Flange Face

Dear Experts, 

During inspection of Flange ( WNRF) , I found some imperfections on Face of Flange .Kindly refer attached document to view snaps of 3 flanges. This  condition is before hydro test. I found this during Bolt Torquing process.   

Kindly guide me to decide whether these 3 flanges can be accepted or rejected ? - Also mention code reference in support of Acceptance or Rejection . 

Thank you for your time . 

Regards. 

ABHISHEK GHOSH 

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
 
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/groups/opt_out.