YES.
From: kannayeram gnanapandithan <kgpandithan@gmail.com>
To: materials-welding <materials-welding@googlegroups.com>
Sent: Monday, July 29, 2013 4:56 PM
Subject: Re: [MW:18286] Maximum thickness of the job which can be tested in UT for Castings/Forgings
Is it possible to carry out UT on ASS 304/309
Pandithan
On Mon, Jul 29, 2013 at 12:27 PM, SV Swamy <svswamy@gmail.com> wrote:
In practice, it is very difficult to test that sort of thickness. Most of the shop floor instruments used for UT don't have that sort of power. Also, such thicknesses need very low frequencies (may be 100 - 200 KHz) and those probes are also not easy to get.With the normal instruments and probes, I would expect about 30 - 40 inches in carbon steel to be a meaningful range for testing. For stainless steels and castings, it would be still less.SwamyRetd. QC/QA Metallurgist who held ASNT Level III certificate in UT and RT--
On Sunday, July 28, 2013 10:54:33 AM UTC+5:30, sevak hiren wrote:UT can be done up to 200 inch of job thk. depending of penetrating ability of the material. It is a sentence from AWS - CWI exam course module/book.
On Thu, Jul 25, 2013 at 10:37 AM, JOSE SEBASTIAN <jose...@gmail.com> wrote:
Dear Friends,
Please tell me about the maximum thickness of the job which we can test using ultrasonic testing.
Which machine and which method we are using for this.
Please send me the page of the text book where the maximum thickness is mentioned.
Regards,
Jose Sebastian
+919687660525
--
To post to this group, send email to material...@googlegroups.com
To unsubscribe from this group, send email to materials-weld...@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-weld...@googlegroups.com.
For more options, visit https://groups.google.com/groups/opt_out.
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/groups/opt_out.
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/groups/opt_out.
No comments:
Post a Comment