RE: [MW:18242] ASME SEC IX Tube to tubesheet welding procedure qualification

Tube hole configuration for mockup assembly is Essential and it should be as per APPROVED DRAWING or TEMA requirements.

Thanks & Best Regards,

M Veera SAMY

> Date: Fri, 19 Jul 2013 15:51:03 +0530

> Subject: Re: [MW:18219] ASME SEC IX Tube to tubesheet welding procedure qualification
> From: kgpandithan@gmail.com
> To: materials-welding@googlegroups.com
>
> yes/yes
>
> On 7/16/13, Ansari intekhab alam <ansari.ndt@gmail.com> wrote:
> > Dear Prasanna
> > your both answers are " YES"
> >
> >
> > On Sat, Jul 13, 2013 at 7:15 PM, Prasanna <unpb@in.com> wrote:
> >
> >> Dear Experts,
> >> As per QW-193.1,The mockup assembly shall essentially duplicate the tube
> >> hole configuration and the tube-to-tubesheet joint design within the
> >> limits
> >> of the essential variables of QW-288.
> >>
> >> Question 1:Is tube hole configuration refers to tube hole pattern?
> >> Question 2:Is tube hole pattern is essential variable in qualifiacation?
> >>
> >> Thanks & Regards,
> >> Prasanna
> >>
> >> --
> >> To post to this group, send email to materials-welding@googlegroups.com
> >> To unsubscribe from this group, send email to
> >> materials-welding+unsubscribe@googlegroups.com
> >> For more options, visit this group's bolg at
> >> http://materials-welding.blogspot.com/
> >>
> >> http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
> >>
> >> The views expressed/exchnaged in this group are members personel views
> >> and
> >> meant for educational purposes only, Users must take their own decisions
> >> w.r.t. applicable code/standard/contract documents.
> >> ---
> >> You received this message because you are subscribed to the Google Groups
> >> "Materials & Welding" group.
> >> To unsubscribe from this group and stop receiving emails from it, send an
> >> email to materials-welding+unsubscribe@googlegroups.com.
> >> For more options, visit https://groups.google.com/groups/opt_out.
> >>
> >>
> >>
> >
> >
> >
> > --
> > Regards
> > Ansari Intekhab Alam
> >
> > --
> > To post to this group, send email to materials-welding@googlegroups.com
> > To unsubscribe from this group, send email to
> > materials-welding+unsubscribe@googlegroups.com
> > For more options, visit this group's bolg at
> > http://materials-welding.blogspot.com/
> > http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
> >
> > The views expressed/exchnaged in this group are members personel views and
> > meant for educational purposes only, Users must take their own decisions
> > w.r.t. applicable code/standard/contract documents.
> > ---
> > You received this message because you are subscribed to the Google Groups
> > "Materials & Welding" group.
> > To unsubscribe from this group and stop receiving emails from it, send an
> > email to materials-welding+unsubscribe@googlegroups.com.
> > For more options, visit https://groups.google.com/groups/opt_out.
> >
> >
> >
>
> --
> To post to this group, send email to materials-welding@googlegroups.com
> To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
> For more options, visit this group's bolg at http://materials-welding.blogspot.com/
> http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
>
> The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
> ---
> You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
> To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
> For more options, visit https://groups.google.com/groups/opt_out.
>
>