Re: [MW:18208] about boron content in SA 516 grade 70 plates

Dear Sir(s),

                i have gone through ur discussion. can any one guide me what is the metallurgical aspect behind limitation for Boron content??

On Tue, Jul 16, 2013 at 5:31 AM, Pinkal Patel <popspatel@gmail.com> wrote:

 Dear Prashant sir,

Boron requirement as an unspecified element  shall not exceed 0.0005 percent ( as per SA 941 under discussion chapter).

but one thing is there to consider is minimum limit is not to exceed 0.0005. if we consider steel from grade AISI/SAE then they states min 0.0005 to 0.003 %. so kindly look into this matter and pls reply.

regards, Pinkal Patel


On Wednesday, April 28, 2010 11:55:02 AM UTC+5:30, Qamlr wrote:

Dear Mr. Vikas

 

Boron requirement as an unspecified element  shall not exceed 0.0005 percent ( as per SA 941 under discussion chapter).

 

Regards

 

Prashanth Hegde

Head Quality

CICB-Chemicon Pvt. Ltd

 

 

From: material...@googlegroups.com [mailto:material...@googlegroups.com] On Behalf Of Vikas Shah
Sent: Wednesday, April 28, 2010 11:48 AM
To: material...@googlegroups.com
Subject: [MW:4969] about boron content in SA 516 grade 70 plates

 

Dear Sir

 

 

Is boron allowed in the SA516 grade 70 plates upto 0.0014%

 

 

 

Regards,

 

Vikas Dinesh Shah

 

Sanghavi Bothra Engineering Co. Pvt. Ltd.
56, Kika Street, Gulalwadi,
Mumbai – 400004. India.
Mobile: +91-9821532896
Tel: +91-22-40416200 / Fax: +91-22-23452161
Direct Line: +91-22-40416223
E-mail - vi...@sbecpl.com
Website: - www.sbecpl.com

 

Please consider the environment before printing this e-mail

--
To post to this group, send email to material...@googlegroups.com
To unsubscribe from this group, send email to materials-weld...@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.

---

Please don't print this e-mail unless you really need to.
*******************************************************************
This e-mail is confidential. It may also be legally privileged. If you are not the addressee you may not copy, forward, disclose or use any part of it. If you have received this message in error, please delete it and all copies from your system and notify the sender immediately by return e-mail. Internet communications cannot be guaranteed to be timely, secure, error or virus-free. The sender does not accept liability for any errors or omissions.
*******************************************************************
"SAVE PAPER - THINK BEFORE YOU PRINT!"

--
To post to this group, send email to material...@googlegroups.com
To unsubscribe from this group, send email to materials-weld...@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
 
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/groups/opt_out.
 
 

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
 
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/groups/opt_out.