RE: [MW:18214] AWS D1.1 Welder Qualification Base Metal range

Dear Rudolf,

 

Table 4.11 of AWS D1.1 does not answering Mr. Turgut his question because in my opinion his question is regarding base material type instead of Diameter / Wall thickness.

 

Met vriendelijke groeten / Best Regards,

 

Herman Pieper

QA-QC Inspector / IWI-C Welding Inspector / IWT / Materials Expert

 

Job van der Havestraat 6

8384 DB, Wilhelminaoord

Cell: +31 6 51691215

 

Van: materials-welding@googlegroups.com [mailto:materials-welding@googlegroups.com] Namens Rudolf
Verzonden: donderdag 18 juli 2013 11:02
Aan: materials-welding@googlegroups.com
Onderwerp: Re: [MW:18212] AWS D1.1 Welder Qualification Base Metal range

 

Please refer to table 4.11 for qualified range 

Sent from my iPhone

On 18 Jul, 2013, at 2:17 PM, Erhan Turgut <turgut.erhan@gmail.com> wrote:

Dear All,

 

I couldn't find any base metal range for welder qualification.

Do you think same and what is the reason for this?

 

If so what shall we write to Base Metal - Qualification Range row on the certificate?

 

Thanks in advance

 

Regards,

 

Erhan Turgut

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
 
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/groups/opt_out.
 
 

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
 
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/groups/opt_out.