Re: [MW:11441] PQR conversation -20 deg to -40 deg

You have to qualify another PQR with Impact -40 . PQR with -20 can not be used

On Wed, Jun 22, 2011 at 4:08 PM, <vimal.mistry@suzlon.com> wrote:
> Dear All.
> I have PQR with -20 deg Impact & Values are 180 to 194 J Now I require
> PQR with -40deg Impact so can I go through same PQR with  -40deg
> Impact or I should qualify another.
>  If it's acceptable then which std/ spec. can be use as ref.
>
> Vimal
>
> --
> To post to this group, send email to materials-welding@googlegroups.com
> To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
> For more options, visit this group's bolg at http://materials-welding.blogspot.com/
> The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
>

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.