Re: [MW:11438] PWHT on Clad Vessels

On my opinion you perform the PWHT and then you clad because the PWHT could provoke sensitazation of SS
Best regards
Dr Georgios Dilintas
Authorized Nuclear Inspector
Authorized Inspector Supervisor
HBS Regional Technical Manager

---

  From: Muhammed Ibrahim PK [ibratech@gmail.com]
  Sent: 21/06/2011 22:40 ZE3
  To: materials-welding@googlegroups.com
  Subject: Re: [MW:11433] PWHT on Clad Vessels

Hi,

Your WPS is with PWHT for clad restoration/overlay?

Thanks & Regards
Muhammed Ibrahim PK

On 15 June 2011 15:29, Mohd Hafifi Isnan <mdhafifi@gmail.com> wrote:

Dear All

Regarding to the subject above, i have some problems for a vessels which partially clad and required PWHT or not on the clad portion? I have another vessel in the same package but fully clad and client specified stress releiving are not required in the datasheet. The problem is this vessel are in wet H2S service (lethal service) and as per code UW-2, vessels which in lethal service are required PWHT. Comeback to my partially clad vessel, do we need to perform PWHT on the clad portion since the non-clad portion are PWHT. The clad materials also are without PWHT simulation. Non clad vessels materials are SA 516 Gr 70N and clad materials are SA 516 Gr 70N + SS 316L.

Regards

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.