Hi all,
In our project, rewamping of thermal power station, we have to remove some anchors supports welded in Superheater tubes by grinding, after will do the thickness measurement and complete by welding if we have loss material thickness of 10% or less.
My request is, according sect I ASME, we can do it ? which article mention this?
Standard : ASME sect I
Material : SA213 T12, thick 5.4 , T° : 400°C
SA213 T22, thick 7.8, T° : 500°C
No have any information in client specification.
Kind regards
--
GHRAB Zakaria
-- In our project, rewamping of thermal power station, we have to remove some anchors supports welded in Superheater tubes by grinding, after will do the thickness measurement and complete by welding if we have loss material thickness of 10% or less.
My request is, according sect I ASME, we can do it ? which article mention this?
Standard : ASME sect I
Material : SA213 T12, thick 5.4 , T° : 400°C
SA213 T22, thick 7.8, T° : 500°C
No have any information in client specification.
Kind regards
--
GHRAB Zakaria
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
No comments:
Post a Comment