Re: [MW:11434] ESW (Electro Slag Welding) for SS

I am looking for Electro Slag Welding, not in ESSC.

THanks

On Tue, Jun 21, 2011 at 6:43 PM, Prakash Hegde <pb.hegde@yahoo.com> wrote:
> Dear Jaideep
> Which area you are interested of ESSC of SS It is very vast subject
> Are you interested in
> i) Principle of ESSC
> ii) Eqpt used
> iii)SS overlay of which metallurgy
> iv)Single layer or Double layer
> ETC
> Regards
> Hegde
>
> ________________________________
> From: joshi jaydeep <jaydeep.p.joshi@gmail.com>
> To: materials-welding@googlegroups.com
> Sent: Tue, 21 June, 2011 3:22:42 PM
> Subject: [MW:11412] ESW (Electro Slag Welding) for SS
>
> Dear Experts,
>
> Can anybody share experience of ESW for SS (thk may be around 50-100mm).
>
> Reg
> Jaydeep
>
> --
> To post to this group, send email to materials-welding@googlegroups.com
> To unsubscribe from this group, send email to
> materials-welding+unsubscribe@googlegroups.com
> For more options, visit this group's bolg at
> http://materials-welding.blogspot.com/
> The views expressed/exchnaged in this group are members personel views and
> meant for educational purposes only, Users must take their own decisions
> w.r.t. applicable code/standard/contract documents.
>
> --
> To post to this group, send email to materials-welding@googlegroups.com
> To unsubscribe from this group, send email to
> materials-welding+unsubscribe@googlegroups.com
> For more options, visit this group's bolg at
> http://materials-welding.blogspot.com/
> The views expressed/exchnaged in this group are members personel views and
> meant for educational purposes only, Users must take their own decisions
> w.r.t. applicable code/standard/contract documents.
>

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.