RE: [MW:24424] Re: Welder Qualification as per ASME SEC IX

Hi.
Whats Standard are you using in project?
Is posible with visual and rt only but There are case where mechanical test is required.

Enviado desde mi smartphone Samsung Galaxy.

-------- Mensaje original --------
De: Tom Kucera <tfkucera@gmail.com>
Fecha:01/03/2016 04:01 PM (GMT-04:30)
Para: Materials & Welding <materials-welding@googlegroups.com>
Cc:
Asunto: [MW:24422] Re: Welder Qualification as per ASME SEC IX

What about QG 106.3 ?

On Sunday, December 27, 2015 at 9:31:54 AM UTC-5, Azam Mohd wrote:

Dear Expert,

"X" welder working with company and left the organization. Again after Two or three year he is joining back same company. All earlier certificate is available with company with proper documentation.

 

Is it possible to renew his earlier certificate with one sample based on RT or visual inspection OR All new qualification is to be done New. Qualification code is ASME SEC IX.

 

Pls provide your valuable input with standard reference.

 

Thanks & Regards,

Mohd. Azam

Doha-Qatar

--
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
Visit this group at https://groups.google.com/group/materials-welding.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/289c8a88-2c79-4740-b4a1-e0a417fdc0f7%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.