Re: Θέμα: [MW:22603] vessels verticality tolerence as per the code

Sir,

Pls refer Api650 cl.7.5.2 for plumbness of tanks. This may be helpful to you.

On Dec 18, 2014 4:26 PM, "'Shashank Vagal' via Materials & Welding" <materials-welding@googlegroups.com> wrote:

For structures alone, AWS D.1 has it in 5.23, if the codes do not conflict.

 

With Best Regards,

Shashank C Vagal (Quality Adviser)

Neo Metal-Analyst & NDT Services (Approved by IBR, Thermax, etc)

Regd Office: 301, PRATHAMESH, M G Rd – Mahant Rd, Vile Parle East, Mumbai 400 057 INDIA

Tel : +91 22 2611 6640 / +91 9821386292 /  8082395502 / 9819191861    

Works Office: B2, Matere House, Sector No. 14, Pradhikaran, Gat No. 62, Boradewasti, Moshi, Dist: Haveli, PCMC, Pune – 412105, Maharashtra, India
      
www.neometalanalystndt.com / enquiry@neometalanalystndt.com / nach_sam@yahoo.com

---

From: Kumar <sk7920541@gmail.com>
To: materials-welding <materials-welding@googlegroups.com>
Sent: Wednesday, 17 December 2014 1:02 PM
Subject: Re: Θέμα: [MW:22591] vessels verticality tolerence as per the code

10mm per mtr. Is a common criteria regarding structures..but up to a maxm. Of 50mm only.

On Dec 17, 2014 3:48 PM, <gprakash31@gmail.com> wrote:

That's a bit high. It shd be mentioned as subject to max of 10mm or similar

Rgds
Prakash. G.
Independent Consultant. ASME/ISO

From: Swapnil Vanjara Sent: Wednesday, 17 December 2014 10:37 To: materials-welding@googlegroups.com Reply To: materials-welding@googlegroups.com Subject: Re: Θέμα: [MW:22587] vessels verticality tolerence as per the code

generlly it is taken 10 mm per meter but not having any referance 

REGARDS
SWAPNIL VANJARA
B.E. MECHANICAL

CONTACT: +91- 9979541231
                         - 8401236794

On Sat, Dec 13, 2014 at 11:04 PM, Prakash Gotimukul <gprakash31@gmail.com> wrote:

Manufacturer has to declare to what tolerance does he produce the products. There should be some company inhouse standards for all dimensions which are not covered by code.

Rgds

G.Prakash

Independent Consultant, ASME AIS/ISO

Technical Director, Hitek Engg Services, Dubai
 gprakash31@gmail.com.

Tel: +9714 2778511 Mob:+97152 979 5678

On Sat, Dec 13, 2014 at 9:28 PM, <george.dilintas@gr.bureauveritas.com> wrote:

ASME Code does not address this tolerance

Εστάλη από το BlackBerry 10 smartphone μου.

Από: Mathew Bosco Εστάλη: Σάββατο, 13 Δεκεμβρίου 2014 - 19:23 Προς: materials-welding@googlegroups.com Απάντηση σε: materials-welding@googlegroups.com Θέμα: [MW:22555] vessels verticality tolerence as per the code

Pls  anybody give the info

what is tolerance for verticality from top to base of any vessels as per the code.

guide me 

wilson

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
 
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

This message contains confidential information. To know more, please click on the following link: http://disclaimer.bureauveritas.com

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
 
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
 
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
 
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
 
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
 
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
 
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
 
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.