Skip to main content

Re: [MW:22545] Volume of permissible welding in Casting

By Materials & Welding
Thanks Sir.

So this means there is no thumb rule. My senior was saying that a maximum of 3% of casting weight is allowed for welding. I dont know where he got it from.

On Thursday, December 11, 2014 1:20:30 PM UTC+5:30, George Dilintas wrote:

Repair requirements are described in the castings specs.
As an example have a look in para. 10.2 and 10.3 of SA-216  

    best regards

    Dr. Georgios Dilintas

    Authorized Nuclear Inspector
    Authorized Inspector Supervisor


    I&F REGIONAL TECHNICAL MANAGER
    BUREAU VERITAS HELLAS

    Tel: +30 210 40 63 113/4
    Fax: +30 210 40 63 118
    Cell: +30 69 44 64 62 04
    (See attached file: Dilintas_George.vcf)

Inactive hide details for Suhel ---11/12/2014 07:55:07---Hello, Is there any clause in any code which depicts the limitation ofSuhel ---11/12/2014 07:55:07---Hello, Is there any clause in any code which depicts the limitation of permissible

From: Suhel <your...@gmail.com>
To: material...@googlegroups.com
Date: 11/12/2014 07:55
Subject: [MW:22537] Volume of permissible welding in Casting
Sent by: material...@googlegroups.com



Hello,

Is there any clause in any code which depicts the limitation of permissible welding (volume/percentage?) in a casting?

Any kind of casting,

Thanks.

--
To post to this group, send email to material...@googlegroups.com
To unsubscribe from this group, send email to materials-weld...@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm

The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

This message contains confidential information. To know more, please click on the following link: http://disclaimer.bureauveritas.com

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
 
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

Comments

Post a Comment