Hello Dear,
I think so you need to have HVOF high velocity oxygen fuel coating on those equipment's. It will be expensive but surely it can resist wear & tear done by sand. You can check more details. This is modern technique of painting may be the best one also.
Regards,
Addil Yusaf
On 24 December 2014 at 15:18, Ali Al-Zawamri <alzawamri@gmail.com> wrote:
--Dear,We are facing a lot of corrosion and rusting in our plant.Please give your advices on the following:-
- Best surface preparation where sand plasting can not be done.
- Best painting to be used in high humid areas and where surface preparation can not be done by sand plasting?
- After repairs and painting, rusting will take place within one year.
Your input will be highly helpful.Regards
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
Mechanical Engineer
Daewoo Enginnering & Construction.
Patrind Hydro Power Project Pakistan.
Contact Number : 03448834732
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
No comments:
Post a Comment