Re: [MW:22575] Re: Iridium instead of selenium source

Hi Sir,
             For low thickness you can go for X ray. This could be a better one.

Regards
S.Samaran
Welding Inspector
AWS-CWI

On 09/12/2014 2:14 pm, <pkkanishk2006@gmail.com> wrote:

Try D4 with IR192.

On Thursday, August 28, 2014 7:43:01 AM UTC+5:30, pradipsil wrote:

Dear all,

My client asked for selenium  instead of iridium source upto thickness below  8 mm  field joint due to good sensitivity according to client specification.

Is it possible to do all the joint radiography below 8 mm thk. with iridium source with equivalent or better sensitivity changing the film quality or other variable.

Or any code reference iridium in lieu of selenium source

We are using D5 film.

Regards

Pradip

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
 
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
 
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.