Wednesday, December 31, 2014

[MW:22662] Re: Corrosion & Painting

Dear,
 
Depend on your description, I can't tell which degree of corrosion in your plant, but I try to give you some advices.
 
First, try to find the root cause about corrosion, such as, whether it is materials selection issue, or the plant locate in coast, or not good insulation work, etc.
 
Second, according to accurate root cause, plant decide to do painting. Then, you should find the qualify supplier of painting, also, selection proper coating and  construction process is based on process service condition. So, clarify meeting of cross-displinary is necessary!
Good luck!
 
Leon

--
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
Visit this group at http://groups.google.com/group/materials-welding.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/a41d83bd-1bf2-49b3-ab72-3d7e5f9f585c%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

No comments:

[MW:35763] Hardness range for CS+ Alloy0625 clad welding

Dear experts. I am currently in the process of qualifying a PQR for API 5L X65 + A350 LF6. Both material consists of a base metal with alloy...