TIG probably is mistyped FCW(flux cored welding) he might mean MIG.
Thanks & Regards
Firoz Ahmed R. Makrani, PMP®
Sr. Inspection Engineer
T: +965 2398 6464/6446/6556
E: firoz.makrani@applusvelosi.com
Address: Block 9, Building 24, Office 21, Ground Floor, East Ahmadi Industrial Area
P.O Box 1589, Salmiya-22016, Kuwait
Click here for ApplusVelosi's Email Disclaimer
Buddy...Slag by GTAW process.... You sure?
On Dec 17, 2014 10:14 PM, "Pravin Poornachandran" <htcispravin@gmail.com> wrote:----Pravin PoornachandranKindly advice if anyone have experience using TG-X from KOBELCO and how to remove the slag inside the pipe.However, it is difficult to remove slag on inside the pipe.Root face: 1mmRoot opening: 3-4mmBevel angle: 65 degThickness: 4-5mmMaterial: SS 316LDear Expert,Welding condition:
I'm having issue on removing slag on root pass welding for stainless steel pipe weldingPipe dia: 4 inchI'm using KOBELCO TG-X316L FCW TIG rod, special consumable which can eliminate back purging which save cost on Ar.
Best regards,
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
No comments:
Post a Comment